32-bit TRAVEO™ T2G Arm® Cortex® Microcontroller

Body Control Modules, HVAC, Gateway

The Infineon TRAVEO™ T2G microcontrollers are based on the Arm® Cortex®-M4(Single core)/M7(Single core/Dual core) core and deliver high performance, enhanced human-machine interfaces, high-security and advanced networking protocols tailored for a broad range of automotive applications such as electrification, body control modules, gateway, and infotainment applications.

Based on the powerful Arm® Cortex® M series core in single and dual core operation it offers state-of-the-art real time performance, safety and security features. Infineon TRAVEO™ T2G MCUs are used in motor control for hybrid and electric vehicles (HEV/EV), body electronics.

Infineon TRAVEO™ T2G family builds upon the successful TRAVEO™ T1G families.

The family supports the latest in-car networks, offers high performance function optimized for a minimum memory footprint and embeds dedicated features to increase data security in the car.

32-bit TRAVEO™ T2G Arm® Cortex® Microcontroller subcategories

TRAVEO™ T2G CYT4BF Series

Arm® Cortex®-M7F dual core-based CYT4BF series with 8MB flash memory for high performance
Infineon’s TRAVEO™ T2G CYT4BF series MCUs comes with processing power and network connectivity built into the Arm® Cortex®-M7F dual core.

The CYT4BF series is designed for body control modules, gateway, and infotainment applications. This series supports frequent data changes with faster, more secure communication via Ethernet AVB (Audio Video Bridging), CAN-FD and FlexRay.

These devices also meet broad application needs by embedding High-speedSPI (Single, Dual, Quad, or Octal) or HYPERBUS™ interface for external memory interface, Secure Digital High Capacity (SDHC) interface supporting embedded MultiMediaCard (eMMC), SecureDigital (SD), or SDIO (Secure Digital Input Output), as well as Inter-IC Sound (I2S) Interfaces implemented for connecting digital audio devices.

TRAVEO™ T2G devices have advanced security features with the introduction of HSM (Hardware security module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 350-MHz Arm® Cortex® -M7F dual core
• 8 MB code flash, 256 KB work flash and 1024 KB SRAM and Arm® Cortex® -M0+

Connectivity

• Up to 2-ch Ethernet AVB (Audio Video Bridging) for real-time media streaming, one-unit FlexRay to support high-speed communication, and 10-ch CAN FD for faster communication for increased data bandwidth
• Up to 11-ch runtime-reconfigurable Serial Communication Block (SCB) each configurable as I2C, SPI or UART in addition to 20-ch LIN/UART

A/D converter

• Up to 96-ch 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• Up to 99-ch 16-bit and 16-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer

Audio interfaces

• Up to 3 Inter-IC Sound (I2S) Interfaces for connecting digital audio devices

GPIOs

• Up to 240 Programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module), and hardware-accelerated cryptography engine (on/off option)*
• One Time Programmable Fuses (OTP) to manage device lifecycle
• Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU) and Peripheral Protection Unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

*Firmware solution available include Infineon security low level driver and third-party firmware

Packages

• 176 TEQFP, 272 BGA, 320 BGA

Temperature range

• 40 to 105℃ (S-grade)
• 40 to 125℃ (E-grade)

TRAVEO™ T2G CYT3BB/CYT4BB Series

Arm® Cortex®-M4F-BASED CYT3BB/4BB series with 4MB flash memory for high performance
Infineon’s TRAVEO™ T2G CYT3BB/4BB series MCUs comes with processing power and network connectivity built into the Arm® Cortex®-M7F single/dual core.

The CYT3BB/4BB series is designed for body control modules, gateway, and infotainment applications. This series supports frequent data changes with faster, more secure communication via Ethernet AVB (Audio Video Bridging), CAN-FD and FlexRay.

These devices also meet broad application needs by embedding High-speedSPI (Single, Dual, Quad, or Octal) or HYPERBUS™ interface for external memory interface, Secure Digital High Capacity (SDHC) interface supporting embedded MultiMediaCard (eMMC), SecureDigital (SD), or SDIO (Secure Digital Input Output), as well as Inter-IC Sound (I2S) Interfaces implemented for connecting digital audio devices.

TRAVEO™ T2G devices have advanced security features with the introduction of HSM (Hardware security module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon’s Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 250-MHz Arm® Cortex® -M7F single/dual core
• 4 MB code flash, 256 KB work flash and 768 KB SRAM and Arm® Cortex®-M0+

Connectivity

• 1-ch Ethernet AVB (Audio Video Bridging) for real-time media streaming and 8-ch CAN FD for faster communication for increased data bandwidth
• Up to 11-ch runtime-reconfigurable Serial Communication Block (SCB) each configurable as I2C, SPI or UART in addition to 20-ch LIN/UART

A/D converter

• Up to 72-ch 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• Up to 63-ch 16-bit and 8-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer
• Audio interfaces
• Up to 3 Inter-IC Sound (I2S) Interfaces for connecting digital audio devices

GPIOs

• Up to 220 Programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module), and hardware-accelerated cryptography engine (on/off option)*
• One Time Programmable Fuses (OTP) to manage device lifecycle
• Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU) and Peripheral Protection Unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

*Firmware solution available include Infineon’s security low level driver and third-party firmware

Packages

• 100/144/176 TEQFP, 272 BGA

Temperature range

• 40 to 105°C (S-grade)
• 40 to 125°C (E-grade)

TRAVEO™ T2G CYT2BL Series

Arm® Cortex®-M4F-based CYT2BL series with 4MB flash memory
Infineon’s TRAVEO™ T2G CYT2BL series MCUs are designed for automotive body electronics with processing power and network connectivity built into the Arm® Cortex®-M4F. These devices are designed for automotive body applications such as body control modules, HVAC, and lighting.

TRAVEO™ devices have advanced security features with the introduction of HSM (Hardware Security Module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 160-MHz Arm® Cortex®-M4F Single
• 4 MB code flash, 128 KB work flash and 512 KB SRAM and Arm® Cortex®-M0+

Connectivity

• Up to 8-ch CAN FD for faster communication for increased data bandwidth, 4-ch CXPI for higher response to succeed the widely-used LIN protocol
• Up to 8-ch runtime-reconfigurable Serial Communication Block (SCB) each configurable as I2C, SPI or UART in addition to 12-ch LIN/UART

A/D converter

• Up to 64-ch, 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• Up to 75-ch 16-bit and 8-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer

GPIOs

• Up to 152 Programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module), and hardware-accelerated cryptography engine (on/off option)*
• One Time Programable Fuses (OTP) to manage device lifecycle
• Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU) and Peripheral Protection Unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

*Firmware solution available include Infineon’s security low level driver and third-party firmware

Packages

• 176/144/100/80/64 LQFP

Temperature range

• 40 to 105°C (S-grade)
• 40 to 125°C (E-grade)

TRAVEO™ T2G CYT2B9 Series

Arm® Cortex®-M4F-based CYT2B9 series with 2MB flash memory and CXPI controller support
Infineon’s TRAVEO™ T2G CYT2B9 series MCUs are designed for automotive body electronics with processing power and network connectivity built into the Arm® Cortex®-M4F.

This series provides higher response and faster communication with the embedded CXPI interface in addition to CAN FD interface, and is ideal for body control modules, HVAC, and lighting. TRAVEO™ devices have advanced security features with the introduction of HSM (Hardware Security Module), dedicated Cortex®-M0+ for secure processing and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 160-MHz Arm® Cortex®-M4F Single
• 2 MB code flash, 128 KB work flash and 256 KB SRAM and Arm® Cortex® -M0+

Connectivity

• Up to 8-ch CAN FD for faster communication for increased data bandwidth, 4-ch CXPI for higher response to succeed the widely-used LIN protocol
• Up to 8-ch runtime-reconfigurable Serial Communication Block (SCB) each configurable as I2C, SPI or UART in addition to 12-ch LIN/UART

A/D converter

• Up to 64-ch, 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• Up to 75-ch 16-bit and 8-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer

GPIOs

• Up to 152 Programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module) and hardware-accelerated cryptography engine (on/off option)*
• One Time Programable Fuses (OTP) to manage device lifecycle
• Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU) and Peripheral Protection Unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

*Firmware solution available include Infineon security low level driver and third-party firmware

Packages

• 176/144/100/80/64 LQFP

Temperature range

• 40 to 105℃ (S-grade)
• 40 to 125℃ (E-grade)

TRAVEO™ T2G CYT2B7 Series

Arm® Cortex®-M4F-based CYT2B7 series with 1 MB flash memory
Infineon’s TRAVEO™ CYT2B7 series MCUs are designed for Automotive Body electronics with processing power and network connectivity built into the Arm® Cortex®-M4F. These devices are designed for Automotive Body applications such as body control modules, HVAC, and lighting.

TRAVEO™ devices have advanced security features with the introduction of HSM (Hardware Security Module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 160-MHz Arm® Cortex®-M4F Single
• 1 MB code flash, 96 KB work flash and 128 KB SRAM and Arm® Cortex®-M0+

Connectivity

• Up to 6-ch CAN FD and up to 8-ch serial communication block (SCB) and 8-ch LIN/UART

A/D converter

• Up to 64-ch, 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• 75-ch 16-bit and 4-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer

GPIOs

• Up to 152 Programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module) and hardware-accelerated cryptography engine (on/off option)*
• One Time Programmable Fuses (OTP) to manage device lifecycle
• Memory Protection Unit (MPU), Shared Memory Protection unit (SMPU) and Peripheral Protection unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

TRAVEO™ T2G CYT2B6 Series

Arm® Cortex®-M4F-based CYT2B6 series with 512 KB flash memory
Infineon’s TRAVEO™ T2G CYT2B6 series MCUs are designed for automotive body electronics with processing power and network connectivity built into the Arm® Cortex®-M4F. These devices are designed for automotive body applications such as body control modules, HVAC, and lighting.

TRAVEO™ T2G devices have advanced security features with the introduction of HSM (Hardware Security Module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Infineon Autosar MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

32-bit MCU core systems

• 80-MHz Arm® Cortex®-M4F Single
• 512 KB code flash, 96 KB work flash and 64 KB SRAM and Arm® Cortex®-M0+

Connectivity

• Up to 4-ch CAN FD and up to 6-ch serial communication block (SCB) and 5-ch LIN/UART

A/D converter

• Up to 32-ch, 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

• 46-ch 16-bit and 2-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
• Real Time Clock (RTC)
• Event generation timer

GPIOs

• Up to 78 programmable GPIOs

Safety and security

• Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module) and hardware-accelerated cryptography engine (on/off option)*
• One Time Programmable Fuses (OTP) to manage device lifecycle
• Memory protection unit (MPU), shared memory protection unit (SMPU) and peripheral protection unit (PPU) for memory and peripheral protection
• Support JTAG security for secure debugging
• Safety features: ECC for memory, monitors for power supply voltage and clock

*Firmware solution available include Infineon’s security low level driver and third-party firmware

Packages

• 100/80/64 LQFP

Temperature range

• 40 to 105°C (S-grade)
• 40 to 125°C (E-grade)