Infineon’s ISOFACE™ are highly reliable industrial interface ICs with integrated isolation that can improve reliability by 5-times and cut the product launch time of industrial automation systems by 50 percent. ISOFACE™ sets new standards in diagnostic capabilities, reducing unscheduled downtimes to a minimum. Take advantage of the various benefits of Infineon’s solution for isolated industrial interface ICs.
Infineon’s galvanically isolated 8-channel ISOFACE™ output switches can be used to drive any kind of resistive, inductive, or capacitive loads. Each of the switch outputs is fully short-circuit proof and overtemperature protected, which is another aspect underscoring the extreme ruggedness of the ISOFACE™ output switches. The level of functional integration by Infineon’s ISOFACE™ output switches improves system stability and reliability significantly and reduces consumed PCB area drastically.
Infineon’s ISOFACE™ digital input ICs are an intelligent system solution offering robust galvanic isolation between the µC on the control side and the 24V factory floor environment, frequently referred to as the “process side”. They can be directly connected to digital inputs like sensors or switches and to microcontroller or Bus-ASIC. Compared to alternative solutions, ISOFACE™ digital input ICs enable up to four times more channels on the same PCB area. A robust galvanic isolation is integrated. This high level of integration density combined with the low power consumption is a key enabler for highly compact industrial control products.
Product Family | Part Number | UL 1577 500 Vrms |
UL 508 Basic |
CSA C22.2 N°14 Basic |
ISOFACE™ | ISO1H801G | √ | √ | |
ISO1H811G | √ | √ | ||
ISO1H812G | √ | √ | ||
ISO1H815G | ||||
ISO1H816G | ||||
ISO2H823V | √ | √ | ||
ISO2H827V | √ | √ | ||
ISO1I811T | √ | |||
ISO1I813T | √ | |||
ISO1I815T | √ |
Factory automation systems have to meet IEC 61131-4 requirements both in terms of input and output characteristics, as well as in isolation robustness (EN 61010-1). Most of these systems are deployed in very harsh environments and therefore have to withstand extreme EMI disturbances (surge, burst, RF) according to IEC 61000-4. Infineon’s ISOFACE™ isolated industrial interface ICs are prepared for designs, which are exposed to EMI disturbances at system-level.
Contrary to some alternatives, Infineon’s isolated industrial interface products have integrated galvanic isolation, truly short-circuit proof outputs, and strong designed-in EMI robustness. This does not only ease the system design process significantly but results in longevity as well.
It is critical to reduce system downtimes to virtually zero. For continuous verification of the system-integrity and in case of problems in minimizing costly system downtimes by factors of up to 30, Infineon’s ISOFACE™ isolated industrial interface products contain one-of-a-kind support for diagnostics. That is why leading factory automation companies are choosing Infineon’s ISOFACE™ isolated industrial interface products.
Production-ready and EMI-tested reference designs are blueprints to accelerate the product development time by at least a factor of two times. Related documentation as well as product datasheets can be found below. Get product samples, evaluation boards and reference designs through the Infineon sales representatives, distribution partners, or by clicking the online procurement buttons below.
Galvanically isolated 8-channel output switches ISO1H801G, ISO1H811G, ISO1H812G, ISO1H815G, ISO1H816G, ISO2H823V
The ISO1H81xG product family integrates:
The ISO1H81xG family offers parallel and serial 3.3V/5V µC-interfaces, facilitating straight forward connection with virtually any µC, µP, ASIC or FPGA. The ISO1H81xG products enable OEM-product designs which meet the stringent EMI requirements of the IEC 61131-2 norm (zone C) applicable for Programmable Logical Controllers (PLC).
Certificates
Product Family | Part Number | UL 1577 (Vrms) 500V |
UL508 Basic |
CSA C22.2 N°14 Basic |
Isolated Industrial Interface |
ISO1H801G | √ | √ | |
ISO1H811G | √ | √ | ||
ISO1H812G | √ | √ | ||
ISO1H815G | ||||
ISO1H816G | ||||
ISO2H823V | √ | √ | ||
ISO1H827V | √ | √ | ||
ISO1I811T | √ | |||
ISO1I813T | √ | |||
ISO1I815T | √ |
ISOFACE™ galvanically isolated digital input ICs ISO1I811T, ISO1I813T
The ISO1I81xT digital input product family is a intelligent system solution offering robust galvanic isolation between the µC on the “control side” and the 24V factory floor environment, frequently referred to as the “process side”.
Certificates
Product Family | Part Number | UL 1577 (Vrms) 500V |
UL508 Basic |
CSA C22.2 N°14 Basic |
Isolated Industrial Interface |
ISO1H801G | √ | √ | |
ISO1H811G | √ | √ | ||
ISO1H812G | √ | √ | ||
ISO1H815G | ||||
ISO1H816G | ||||
ISO2H823V | √ | √ | ||
ISO1H827V | √ | √ | ||
ISO1I811T | √ | |||
ISO1I813T | √ | |||
ISO1I815T | √ |
Copyright © 2021 H2TC - Design by Giáp Phạm